This is an old revision of the document!
Soon after the release of RTL-SDR a lot of people started to play with software defined radios. Although the Elonics E4000 tuner and the Realtek RTL2832U Chip are a long way from the quality and performance/stability of an USRP(2), the price of $11 - EUR30 makes these devices an ideal beginners device for SDR experiments, without having to invest +$1k into hardware.
As soon as the new OsmoSDR is finished and available, it will provide a very cost-effective device, filling the gap between the funcube, with only 96kHz bandwith - some people lovingly call it the sadcube these days - and the USRP. The OsmoSDR approach seems to be the best compromise of both worlds and the osmocom team is doing a real kick-ass job, putting it together.
Right now, not only hackers, but old-school hams and other people are drawn to gnuradio and rtlsdr but sometimes find it hard to leave their known world behind and dive into the new world of doing radio in software. In order to make the transition easier, good examples are desperately needed. The following setup is an easy to understand, uncluttered narrow band FM receiver, that most hams and radio related people should be able to grasp and tweak.
The hardware used in this test was a Hama Nano DVB-T Stick, based on the Elonics E4000 tuner and the RTL 2832 controller.
Elonics E4000 complete reference documents leaked
The following example is based on GNU Radio 3.5.3 and the very versatile OsmoSDR source block. With the OsmoSDR sourceblock it is possible to tune the OsmoSDR as well as the RTL-SDR and the funcube, which makes it the perfect choice for a compatible GNU Radio NFM receiver example.
This setup is meant to be a basic starting point for GNU Radio beginners and will not unleash the real power GR has under the hood.
Download GNU Radio .grc File:
The 868 MHz ISM band is far less crowded here, in comparison to the 433 MHz band. The right screenshot shows a bit more detailed view on a short data transmission.
First TX/RX test on FM 145.2125 / 12.5kHz simplex. An IC-E92D with 0.1W output power was used to send:
Another test recording on DB0EL (Munich) when another HAM was calling on the repeater:
Share some love with the open source mobile communication team (osmocom) for their tireless efforts, to create awesome solutions and keep them open for everyone to make stuff like this possible. When time will allow more tests, we will try to go a bit deeper into APT, POCSAG, ACARS and ADS-B. As always, when you find bugs or create fixes, please report/contribute them back to the community.
73, de • − • − − • − − − • − • • • − • • − − −
Active Wideband Receiver Antenna for your SDR
A great tool to quickly learn morse code, is Todd Anderson's Morse Code Trainer for Android