Flight-Control

<
Previous mounth

04/09/2025
>
Next mounth
	S	M	T	W	F	T	S
15	06 06 06	07 07 07	08 08 08	09 09 09	10 10	11 11	12 12
16	13 13	14 14	15 15	16 16	17 17	18 18	19 19
17	20 20	21 21	22 22	23 23	24 24	25 25	26 26
18	27 27	28 28	29 29	30 30	01 01	02 02	03 03
19	04 04	05 05	06 06	07 07	08 08	09 09	10 10

Hot Projects

SEEDStack

SEEDStack - Open 3D printable seed/sprouting system

DIY Food Hacking

UCSSPM

UCSSPM - Unified Clear-Sky Solar Prediction Model

Open Solar Power

picoReflow

picoReflow - DIY PID Reflow Oven Controller based on RaspberryPi

DIY Reflow Soldering

PiGI

PiGI - DIY Geiger Counter based on RaspberryPi

RasPi Geiger Counter

DIY ARA-2000

Active Wideband Receiver Antenna for SDR - ARA-2000

Wideband Antenna

DSpace

DSPace - Map everything

Map everything!

Mission-Tags

Share & Donate

VORON 2.4

After printing for 10 years on the venerable f3l1ks it was time to push the 3D printing game to the next level and recent new developments - most importantly: CoreXY kinematic and klipper firmware. During the design phase of a new CoreXY printer a new open source community project got released: The Voron 2.4.

https://www.vorondesign.com/voron2.4 https://mods.vorondesign.com/v24

LDO Kit

https://docs.ldomotors.com/voron/LDO_Voron_Distributors

Frame Assembly

Motion Rig

Electronics

AIXONTEC 1 m Cat6 Gigabit Network Cable Shielded high-flex Black Thin LAN Cable with 4.0 mm Cable Diameter and short connectors: https://www.amazon.de/dp/B075F42SZL

Klipper Config

SuperSlicer Config

Mods

Trace: