User Tools

Site Tools


Navigation Menu

Flight-Control

<
Previous mounth
09/26/2022
>
Next mounth
SMTWFTS
39
25
25
26
26
2728293001
4002030405060708
4109101112131415
4216171819202122
4323242526272829









Hot Projects

SEEDStack

SEEDStack - Open 3D printable seed/sprouting systemDIY Food Hacking

UCSSPM

UCSSPM - Unified Clear-Sky Solar Prediction ModelOpen Solar Power

picoReflow

picoReflow - DIY PID Reflow Oven Controller based on RaspberryPiDIY Reflow Soldering

PiGI

PiGI - DIY Geiger Counter based on RaspberryPiRasPi Geiger Counter

DIY ARA-2000

Active Wideband Receiver Antenna for SDR - ARA-2000Wideband Antenna

DSpace

DSPace - Map everythingMap everything!

Mission-Tags

This is an old revision of the document!


Open Switch-Mode Controller

  • ATMega Core Boost/Buck Logic based on LTC3780 design
  • Measure with external ADC/SPI
  • Control with MOSFET Driver/SPI
  • 4 MOS/TrenchFET Setup

Safety

  • Design the regulator to measure the output current with some current sense method, and when it gets close to the current setpoint, the regulator automatically reduces the amount of power transferred to the output. When the output looks like a short circuit, allow exactly the setpoint current to flow. (current limiting)
  • Design the regulator to measures the output current, and if it ever goes even a tiny amount over the current setpoint, the regulator assumes something has gone horribly wrong, and automatically turns off all output power.