User Tools

Site Tools


Navigation Menu

Flight-Control

  • StatusClosed
  • OP-ModePre-Launch
  • LocationN48 - E11
  • Localtime05:48
  • CountdownT-00D 00:00

Hot Projects

SEEDStack

SEEDStack - Open 3D printable seed/sprouting systemDIY Food Hacking

UCSSPM

UCSSPM - Unified Clear-Sky Solar Prediction ModelOpen Solar Power

picoReflow

picoReflow - DIY PID Reflow Oven Controller based on RaspberryPiDIY Reflow Soldering

PiGI

PiGI - DIY Geiger Counter based on RaspberryPiRasPi Geiger Counter

DIY ARA-2000

Active Wideband Receiver Antenna for SDR - ARA-2000Wideband Antenna

DSpace

DSPace - Map everythingMap everything!

Mission-Tags

This is an old revision of the document!


Apollo-NG Mobile Hackbase

Apollo-NG Hackerspacecraft

Apollo-NG is a mobile, self-sustainable, independent and highly-experimental Hackbase, focused on research, development and usage of next-generation open technology while visiting places without a resident, local Hackerspace and offering other Hackers the opportunity to work together on exciting projects and to share fun, food, tools & resources, knowledge, experience and inspiration.

Events

What's happening right now?

Live View of picoPrint 3D Printer:

Latest 3D Printjob Timelapse Video


More Info: picoPrint 3D Printer.

If the video fails to load, do a hard refresh.

Latest Mission-Log Entries

Patreon killed itself (behind the scenes)

TRANSCRIPT OF CALL BETWEEN MATT CHRISTIANSEN AND JACQUELINE HART OF PATREON, 12.20.2018

JACQUELINE: So I wanted to reach out to you - we’ve had a lot of creators on Patreon with concerns. And there was obviously a lot of concern last week, so I wanted to follow up with creators on the platform. So even though you didn’t reach out to us, we had others that reached out, so I wanted to make sure that we heard directly from creators about what their concerns would be and so that’s really the reason I set up this call.

MATT: Sure. I’ve definitely got a lot of notes and a lot of questions that I’d like to ask. I wanted to begin by just noting the scale of the loss on my account, if you’re comfortable with that.

JACQUELINE:: Yes. Yes.

MATT: I did the numbers this morning. I am down 39% of my total patrons, 42% of the money on my account. I’ve been on Patreon 2 years and 3 months now, so over 2 years of work on Patreon at stake here. I don’t know for sure - I’m estimating that roughly an entire year’s gain has been wiped out. Everything that I was able to grow over 2018 is gone now. I just hope everyone at Patreon understands the scale of the damage that the decision that they made has caused to uninvolved creators. And I hope you would understand why almost half of my patronage would leave given the decision that you made.

JACQUELINE: Yes. And that’s obviously one of the reasons that I wanted to set up this call, because - sorry, one small thing. I just wanted to make sure that we’re not recording. Like, I’m not recording on my side.

→ Read more...

Rocket Launch-A-Palooza

Today is a special day, since we can expect up to 5 launches over the next 24h window:

Agency Vehicle Payload ETL Stream Status
ISRO GSLV-F11 GSAT-7A 2018-12-19 10:10 UTC Report Launched
ESA Soyuz CSO1 2018-12-19 16:17 UTC LIVE Launched
Space X Falcon 9 GPS III-2 2018-12-20 14:03 UTC LIVE Investigating
ULA Delta IV NROL-71 2018-12-21 01:31 UTC LIVE Investigating
Blue Origin New Shepard NASA Experiments 2018-12-21 14:30 UTC Investigating

Updates:

  • SpaceX: Scrubbed due to Falcon-9 abort → slated 20181220
  • Blue Origin: Scrubbed due to ground infrastructure issue → slated 20181221
  • ESA: launch postponed by 24 hours due to unfavorable high-altitude wind conditions
  • ULA: scrubbed due to high ground level wind conditions → slated 20181219
  • ULA: scrubbed again due to indications of elevated hydrogen concentrations within the port booster engine section → slated 20181220
2018/12/18 12:54 chrono 0

PiGI goes TTN - IoT Radiation Monitoring

At this point, 12 PiGI - Raspberry Pi Geiger-Müller Interface nodes are in active deployment at TDRM, helping to monitor the environment independently and so far reliably. Additional 12 nodes are on the current roadmap. That is a great success story and just in the spirit of the idea, development and open-source model of it.

Now the TDRM Working Group at Karel-de-Grote Hogeschool, Campus Hoboken in Antwerp pushed it even further and developed a LoRaWan based TTN (The Things Network) Adapter for the PiGI, to have it connected to the Internet of Things:

TTN PiGI Node TTN PiGI Node

This project was never intended to generate profit, but to free people from having to rely on government/military based radiation monitoring data. The incidents at Chernobyl and Fukushima showed very clearly how this data is suddenly unavailable or if presented, showing only measurements which can't be trusted, to calm people down.

PiGI was meant to be a cheap, available and easy to replicate solution, serving educational as well as practical monitoring purposes. Something to copy, not encumbered by old “intellectual property” ballast and secrecy. To spread and inspire new developments. Congratulations to the TDRM Working group, for succeeding admirably.