User Tools

Site Tools

Navigation Menu

Flight-Control

<
Previous mounth
12/04/2024
>
Next mounth
SMTWFTS
49
01
01
02
02
03
03
04
04		050607
5008091011121314
5115161718192021
5222232425262728
0129303101020304









Hot Projects

SEEDStack

SEEDStack - Open 3D printable seed/sprouting systemDIY Food Hacking

UCSSPM

UCSSPM - Unified Clear-Sky Solar Prediction ModelOpen Solar Power

picoReflow

picoReflow - DIY PID Reflow Oven Controller based on RaspberryPiDIY Reflow Soldering

PiGI

PiGI - DIY Geiger Counter based on RaspberryPiRasPi Geiger Counter

DIY ARA-2000

Active Wideband Receiver Antenna for SDR - ARA-2000Wideband Antenna

DSpace

DSPace - Map everythingMap everything!

Mission-Tags

3d 3d-printer antenna biomass development diy dspace energy ethernet events fabrication felix geiger geigercounter gentoo geo gis gnuradio hack hardware lab linux livestream map monitoring pi picocnc picofab picoprint pigi power printer python radiation radio raspberry research rf robot sdr security simulation software solar sponsor switch test voron wind zephyr

Please share what you like

Apollo-NG Mobile Hackbase

Apollo-NG Hackerspacecraft

Apollo-NG is a mobile, self-sustainable, independent and highly-experimental Hackbase, focused on research, development and usage of next-generation open technology while visiting places without a resident, local Hackerspace and offering other Hackers the opportunity to work together on exciting projects and to share fun, food, tools & resources, knowledge, experience and inspiration.

Latest Mission-Log Entries

Voron 2.4 Build Livestream EP3

In this next Episode we continue to print Voron 2.4 R2 ApolloX ASA parts on the open frame Felix sucessfully. The AB Motor Mounts and XY Mounts have come out fairly well. In the next Episode on the follwing Sunday we will switch over to grey Filament and print the most demanding part: The Stealthburner's Main Body.

If you want to see more, please join Odysee and follow our channel there.

2022/08/10 17:51 · chrono · 18 Comments
, , , ,

Voron 2.4 Build Livestream EP2

In this next Episode we continue to print Voron 2.4 R2 ApolloX ASA parts on the open frame Felix sucessfully. The results are not perfect yet, but there is still enough filament and more parts to tweak more slicer settings to get it to as close to perfect as possible within the constraints of the printer and environment. But so far, the brims and draft shield seem to hold.

If you want to see more, please join Odysee and follow our channel there.

2022/08/02 19:07 · chrono · 21 Comments
, , , ,

First Voron 2.4 Build Livestream

This was a first trial attempt to see if we can stream our Voron 2.4 Printer build process live via Odysee. The challenge was to figure out if we can print the needed Voron 2.4 R2 parts on the open-frame Felix with ApolloX ASA.

If you want to see more, please join Odysee and follow our channel there.

2022/08/02 18:58 · chrono · 15 Comments
, , , ,

<< Newer entries | Older entries >>

Trace: start

Page Tools