In todays Episode we continue to print Voron 2.4 R2 parts with ApolloX ASA (grey) on the open frame Felix successfully. This was without a doubt the most demanding and complicated part to print due to its size and complexity: The Stealthburner's Main Body. It is nowhere near perfect but it will do hopefully do its job and print itself again on the Voron perfectly :)

If you want to see more, please join Odysee and follow our channel there.

In this next Episode we continue to print Voron 2.4 R2 ApolloX ASA parts on the open frame Felix sucessfully. The AB Motor Mounts and XY Mounts have come out fairly well. In the next Episode on the follwing Sunday we will switch over to grey Filament and print the most demanding part: The Stealthburner's Main Body.

If you want to see more, please join Odysee and follow our channel there.

In this next Episode we continue to print Voron 2.4 R2 ApolloX ASA parts on the open frame Felix sucessfully. The results are not perfect yet, but there is still enough filament and more parts to tweak more slicer settings to get it to as close to perfect as possible within the constraints of the printer and environment. But so far, the brims and draft shield seem to hold.

If you want to see more, please join Odysee and follow our channel there.