User Tools

Site Tools


Navigation Menu

Flight-Control

  • StatusClosed
  • OP-ModePre-Launch
  • LocationN48 - E11
  • Localtime11:31
  • CountdownT-00D 00:00

Hot Projects

SEEDStack

SEEDStack - Open 3D printable seed/sprouting systemDIY Food Hacking

UCSSPM

UCSSPM - Unified Clear-Sky Solar Prediction ModelOpen Solar Power

picoReflow

picoReflow - DIY PID Reflow Oven Controller based on RaspberryPiDIY Reflow Soldering

PiGI

PiGI - DIY Geiger Counter based on RaspberryPiRasPi Geiger Counter

DIY ARA-2000

Active Wideband Receiver Antenna for SDR - ARA-2000Wideband Antenna

DSpace

DSPace - Map everythingMap everything!

Mission-Tags

GHETTO-RAID Voodoo

https://www.amazon.de/gp/product/B01H43DNPY/ http://www.conrad.com/ce/en/product/1420906/RAID-controller-card-2x-M2-NGFF-1x-SATA-socket-2-pin

Manual:

  1. Install M.2 NGFF SATA SSD into M2_1 and M2_2 sockets.
  2. Set J1 RAID Jumper to your desired mode or RAID initial mode.
  3. Set J2 jumper to short SET – GND.
  4. Connect 22-Pin SATA connector to SATA Host and Power.
  5. Turn on the power.
  6. Check “Device Manager” the RAID status of M.2 SSD .
  7. Set J2 jumper to short SET – NC and disable RAID Mode Change
User Manual

[38198.548757] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen
[38198.548761] ata6: irq_stat 0x00400040, connection status changed
[38198.548765] ata6: SError: { PHYRdyChg 10B8B DevExch }
[38198.548774] ata6: hard resetting link
[38204.283034] ata6: link is slow to respond, please be patient (ready=0)
[38208.562937] ata6: COMRESET failed (errno=-16)
[38208.562943] ata6: hard resetting link
[38214.346804] ata6: link is slow to respond, please be patient (ready=0)
[38218.594711] ata6: COMRESET failed (errno=-16)
[38218.594718] ata6: hard resetting link
[38224.362575] ata6: link is slow to respond, please be patient (ready=0)
[38253.649908] ata6: COMRESET failed (errno=-16)
[38253.649916] ata6: limiting SATA link speed to 3.0 Gbps
[38253.649919] ata6: hard resetting link
[38258.665790] ata6: COMRESET failed (errno=-16)
[38258.665797] ata6: reset failed, giving up
[38258.665803] ata6: EH complete

[45419.920134]  sdb: sdb1 sdb2 sdb3 sdb4

In order to reset it was necessary to power off, J2 to SET-GND, J1 to PM, power on, wait a couple of mins, power off, set J1 to R1 (Mirror), leave J2 on SET-GND, power on,

[44010.027895] ata6: exception Emask 0x50 SAct 0x0 SErr 0x40d0800 action 0xe frozen
[44010.027899] ata6: irq_stat 0x00400040, connection status changed
[44010.027904] ata6: SError: { HostInt PHYRdyChg CommWake 10B8B DevExch }
[44010.027912] ata6: hard resetting link
[44010.757949] ata6: SATA link down (SStatus 0 SControl 300)
[44010.757963] ata6: EH complete
[44021.865962] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40d0002 action 0xe frozen
[44021.865967] ata6: irq_stat 0x00000040, connection status changed
[44021.865971] ata6: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch }
[44021.865980] ata6: hard resetting link
[44023.085667] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[44023.085944] ata6.00: ATA-7: JMicron H/W RAID1, 32201020, max UDMA/133
[44023.085948] ata6.00: 1953431552 sectors, multi 1: LBA48
[44023.086236] ata6.00: configured for UDMA/133
[44023.086247] ata6: EH complete
[44023.086563] scsi 5:0:0:0: Direct-Access     ATA      JMicron H/W RAID 1020 PQ: 0 ANSI: 5
[44023.112971] sd 5:0:0:0: Attached scsi generic sg2 type 0
[44023.113113] sd 5:0:0:0: [sdb] 1953431552 512-byte logical blocks: (1.00 TB/931 GiB)
[44023.113140] sd 5:0:0:0: [sdb] Write Protect is off
[44023.113144] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[44023.113200] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[44023.114644] sd 5:0:0:0: [sdb] Attached SCSI disk

~~LINKBACK~~

When you are done with your draft, enter the following URL schema, create the page (with current date and your title) and copy the content into it:

https://apollo.open-resource.org/mission:log:2013:09:24:title-of-mission-log

Discussion

Comment text

Please type the letters you see on the left into the box on the right:

  ____    ___   __  __   __ __ ______
 / __ \  / _ \ / / / /  / //_//_  __/
/ /_/ / / ___// /_/ /  / ,<    / /   
\____/ /_/    \____/  /_/|_|  /_/