User Tools

Site Tools


Navigation Menu

Flight-Control

<
Previous mounth
04/27/2024
>
Next mounth
SMTWFTS
17
21
21
22
22
23
23
24
24
25
25
26
26
27
27
1828293001020304
1905060708091011
2012131415161718
2119202122232425









Hot Projects

SEEDStack

SEEDStack - Open 3D printable seed/sprouting systemDIY Food Hacking

UCSSPM

UCSSPM - Unified Clear-Sky Solar Prediction ModelOpen Solar Power

picoReflow

picoReflow - DIY PID Reflow Oven Controller based on RaspberryPiDIY Reflow Soldering

PiGI

PiGI - DIY Geiger Counter based on RaspberryPiRasPi Geiger Counter

DIY ARA-2000

Active Wideband Receiver Antenna for SDR - ARA-2000Wideband Antenna

DSpace

DSPace - Map everythingMap everything!

Mission-Tags

Fixing Kernel drivers for Huawei E3372s LTE/4G Stick

In order to mitigate the problem of having no internet at all, we got a SIM-Card for LTE/4Ǵ. At the same time the Telekom Speedstick V LTE (which is basically a rebranded Huawei 3372s) became available and not too expensive. A little research showed that it should be really easy to deploy this stick, when flashing a Non-HiLink Firmware (⇐21.xxx), when the Stick could be used just like old modems, with at commands but without the dependency to run pppd/wvdial like in the old modem or even 3G days. You just have to

$ echo "AT^NDISDUP=1,1,"internet.eplus.de" > /dev/ttyUSB1
$ udhcpc wwan0

and should be done with it. In reality this became quite a quest but with combined efforts we managed to get it to work and created a patch for current kernels (tested 3.18.[11-18]. If you also have this stick and are unable to get an IP via dhcp, this patch might be for you.

$ make clean
$ make target/linux/{clean,prepare} V=s QUILT=1
$ cd build_dir/target-mips_34kc_musl-1.1.10/linux-ar71xx_generic/linux-3.18.18/
$ patch -p1 -i /path/to/patchfile/fix-cdc-ncm-huawei-3372s.patch

diff -u a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
--- a/drivers/net/usb/cdc_mbim.c	2015-06-28 17:40:40.000000000 +0000
+++ b/drivers/net/usb/cdc_mbim.c	2015-07-04 15:05:14.546901702 +0000
@@ -158,7 +158,7 @@
 	if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
 		goto err;

-	ret = cdc_ncm_bind_common(dev, intf, data_altsetting);
+	ret = cdc_ncm_bind_common(dev, intf, data_altsetting, 0);
 	if (ret)
 		goto err;

diff -u a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
--- a/drivers/net/usb/cdc_ncm.c	2015-06-28 17:40:40.000000000 +0000
+++ b/drivers/net/usb/cdc_ncm.c	2015-07-09 08:43:01.658770535 +0000
@@ -684,10 +684,11 @@
 		ctx->tx_curr_skb = NULL;
 	}

+	kfree(ctx->delayed_ndp16);
 	kfree(ctx);
 }

-int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting)
+int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags)
 {
 	const struct usb_cdc_union_desc *union_desc = NULL;
 	struct cdc_ncm_ctx *ctx;
@@ -855,6 +856,17 @@
 	/* finish setting up the device specific data */
 	cdc_ncm_setup(dev);

+	/* Device-specific flags */
+	ctx->drvflags = drvflags;
+
+	/* Allocate the delayed NDP if needed. */
+	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
+		ctx->delayed_ndp16 = kzalloc(ctx->max_ndp_size, GFP_KERNEL);
+		if (!ctx->delayed_ndp16)
+			goto error2;
+		dev_info(&intf->dev, "NDP will be placed at end of frame for this device.");
+	}
+
 	/* override ethtool_ops */
 	dev->net->ethtool_ops = &cdc_ncm_ethtool_ops;
@@ -954,8 +966,11 @@
 	if (cdc_ncm_select_altsetting(intf) != CDC_NCM_COMM_ALTSETTING_NCM)
 		return -ENODEV;

-	/* The NCM data altsetting is fixed */
-	ret = cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM);
+	/* The NCM data altsetting is fixed, so we hard-coded it.
+	 * Additionally, generic NCM devices are assumed to accept arbitrarily
+	 * placed NDP.
+	 */
+	ret = cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM, 0);

 	/*
 	 * We should get an event when network connection is "connected" or
@@ -986,6 +1001,14 @@
 	struct usb_cdc_ncm_nth16 *nth16 = (void *)skb->data;
 	size_t ndpoffset = le16_to_cpu(nth16->wNdpIndex);

+	/* If NDP should be moved to the end of the NCM package, we can't follow the
+	* NTH16 header as we would normally do. NDP isn't written to the SKB yet, and
+	* the wNdpIndex field in the header is actually not consistent with reality. It will be later.
+	*/
+	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)
+		if (ctx->delayed_ndp16->dwSignature == sign)
+			return ctx->delayed_ndp16;
+
 	/* follow the chain of NDPs, looking for a match */
 	while (ndpoffset) {
 		ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb->data + ndpoffset);
@@ -995,7 +1018,8 @@
 	}

 	/* align new NDP */
-	cdc_ncm_align_tail(skb, ctx->tx_ndp_modulus, 0, ctx->tx_max);
+	if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
+		cdc_ncm_align_tail(skb, ctx->tx_ndp_modulus, 0, ctx->tx_max);

 	/* verify that there is room for the NDP and the datagram (reserve) */
 	if ((ctx->tx_max - skb->len - reserve) < ctx->max_ndp_size)
@@ -1008,7 +1032,11 @@
 		nth16->wNdpIndex = cpu_to_le16(skb->len);

 	/* push a new empty NDP */
-	ndp16 = (struct usb_cdc_ncm_ndp16 *)memset(skb_put(skb, ctx->max_ndp_size), 0, ctx->max_ndp_size);
+	if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
+		ndp16 = (struct usb_cdc_ncm_ndp16 *)memset(skb_put(skb, ctx->max_ndp_size), 0, ctx->max_ndp_size);
+	else
+		ndp16 = ctx->delayed_ndp16;
+
 	ndp16->dwSignature = sign;
 	ndp16->wLength = cpu_to_le16(sizeof(struct usb_cdc_ncm_ndp16) + sizeof(struct usb_cdc_ncm_dpe16));
 	return ndp16;
@@ -1023,6 +1051,15 @@
 	struct sk_buff *skb_out;
 	u16 n = 0, index, ndplen;
 	u8 ready2send = 0;
+	u32 delayed_ndp_size;
+
+	/* When our NDP gets written in cdc_ncm_ndp(), then skb_out->len gets updated
+	 * accordingly. Otherwise, we should check here.
+	 */
+	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)
+		delayed_ndp_size = ctx->max_ndp_size;
+	else
+		delayed_ndp_size = 0;

 	/* if there is a remaining skb, it gets priority */
 	if (skb != NULL) {
@@ -1077,7 +1114,7 @@
 		cdc_ncm_align_tail(skb_out,  ctx->tx_modulus, ctx->tx_remainder, ctx->tx_max);

 		/* check if we had enough room left for both NDP and frame */
-		if (!ndp16 || skb_out->len + skb->len > ctx->tx_max) {
+		if (!ndp16 || skb_out->len + skb->len + delayed_ndp_size > ctx->tx_max) {
 			if (n == 0) {
 				/* won't fit, MTU problem? */
 				dev_kfree_skb_any(skb);

@@ -1150,6 +1187,17 @@
 		/* variables will be reset at next call */
 	}

+	/* If requested, put NDP at end of frame. */
+	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
+		nth16 = (struct usb_cdc_ncm_nth16 *)skb_out->data;
+		cdc_ncm_align_tail(skb_out, ctx->tx_ndp_modulus, 0, ctx->tx_max);
+		nth16->wNdpIndex = cpu_to_le16(skb_out->len);
+		memcpy(skb_put(skb_out, ctx->max_ndp_size), ctx->delayed_ndp16, ctx->max_ndp_size);
+
+		/* Zero out delayed NDP - signature checking will naturally fail. */
+		ndp16 = memset(ctx->delayed_ndp16, 0, ctx->max_ndp_size);
+	}
+
 	/* If collected data size is less or equal ctx->min_tx_pkt
 	 * bytes, we send buffers as it is. If we get more data, it
 	 * would be more efficient for USB HS mobile device with DMA
diff -u a/drivers/net/usb/huawei_cdc_ncm.c b/drivers/net/usb/huawei_cdc_ncm.c
--- a/drivers/net/usb/huawei_cdc_ncm.c	2015-06-28 17:40:40.000000000 +0000
+++ b/drivers/net/usb/huawei_cdc_ncm.c	2015-07-04 15:23:25.779014586 +0000
@@ -73,11 +73,14 @@
 	struct usb_driver *subdriver = ERR_PTR(-ENODEV);
 	int ret = -ENODEV;
 	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	int drvflags = 0;

 	/* altsetting should always be 1 for NCM devices - so we hard-coded
-	 * it here
+	 * it here. Some huawei devices will need the NDP part of the NCM package to
+	 * be at the end of the frame.
 	 */
-	ret = cdc_ncm_bind_common(usbnet_dev, intf, 1);
+	drvflags |= CDC_NCM_FLAG_NDP_TO_END;
+	ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags);
 	if (ret)
 		goto err;

diff -u a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
--- a/include/linux/usb/cdc_ncm.h	2015-06-28 17:40:40.000000000 +0000
+++ b/include/linux/usb/cdc_ncm.h	2015-07-04 15:27:52.171388014 +0000
@@ -80,6 +80,9 @@
 #define CDC_NCM_TIMER_INTERVAL_MIN		5UL
 #define CDC_NCM_TIMER_INTERVAL_MAX		(U32_MAX / NSEC_PER_USEC)

+/* Driver flags */
+#define CDC_NCM_FLAG_NDP_TO_END			0x02	/* NDP is placed at end of frame */
+
 #define cdc_ncm_comm_intf_is_mbim(x)  ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \
 				       (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE)
 #define cdc_ncm_data_intf_is_mbim(x)  ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB)
@@ -103,9 +106,11 @@

 	spinlock_t mtx;
 	atomic_t stop;
+	int drvflags;

 	u32 timer_interval;
 	u32 max_ndp_size;
+	struct usb_cdc_ncm_ndp16 *delayed_ndp16;

 	u32 tx_timer_pending;
 	u32 tx_curr_frame_num;
@@ -133,7 +138,7 @@
 };

 u8 cdc_ncm_select_altsetting(struct usb_interface *intf);
-int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting);
+int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags);
 void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
 struct sk_buff *cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign);
 int cdc_ncm_rx_verify_nth16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in);

Discussion

fe80:7a55:2272:5f44:5b19:aa03:f171:2ae8, 2016/01/13 22:54

Hi,

what's the firmware version you are running on the dongle?

I have tried to get this dongle work on my ubuntu machines, raspberry and open wrt device.. but no way.

QMI, NDIS.. none of those have worked.

Do you provide modules/packages working for openwrt whith this fix?

chrono, 2016/01/26 13:31

Ahoy,

I haven't got the time to go into details right now, you could have a look into the openwrt-devel mailinglist archives, there is plenty of info there, I tried to get it into current openwrt but there were some admin issues about signing off stuff so it didn't make it. The fix is included in kernel 4.2 IIRC so for now you probably have to build your own openwrt image as stated above. It's easy, so build your own if you need it to work. Other infos about versions, HW info and AT query commands are all in the ML, when this mission log get's released (this is a working template :)) I can try to gather up all info about it in one post to make it easier for people to find.

fe80:7a55:2272:5f44:5b19:aa03:f171:2ae8, 2016/01/13 22:58

Forgot that this is arch dependent! :D

Has this fix being merged to upstream?

I would like to get some this dongle work out of the box.

Enter your comment. Wiki syntax is allowed:
Y K S Y I