User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

playground:mission-log-template [2016/04/19 19:19]
chrono [Science > Superstition]
playground:mission-log-template [2017/07/08 11:09] (current)
chrono
Line 1: Line 1:
 ~~DRAFT~~ ~~DRAFT~~
 +====== GHETTO-RAID Voodoo ======
  
-====== Science > Superstition ======+https://​www.amazon.de/​gp/​product/​B01H43DNPY/​ 
 +http://​www.conrad.com/​ce/​en/​product/​1420906/​RAID-controller-card-2x-M2-NGFF-1x-SATA-socket-2-pin
  
-The Apollo-NG project has gained a lot of street/net credit and credibility over the years, so that ever more often people come out of nowhere, asking questions and looking for advice because they know that they won't get the usual bullshit when doing so. It doesn'​t matter if it may appear "​weird"​ or "​strange"​ to someone, as long it's an honest question and the basic mental ability to eventually accept results which may be flagged unacceptable by indoctrinated faith/​believe/​superstition constructs in the brain. 
  
-Since we have nothing to sell in order to gain profit, we have no dog in anyone'​s fight, therefore we can just freely hack around and strive to find the maximum degree of acceptable, objective "​truth"​ as best as we can, with as much reason and practical/​empiric verification as possible, with however little means we have. And by sharing what we have learned, we all gain lightning fast distribution of the current state of knowledge (not necessarily the ultimate truth, if it exists), practical approaches to copy and give more people a chance not to fall into the deep and in hindsight often more than embarrassing deadlock of a new religion"​Tin-Foilism"​. ​+Manual:
  
-In times where practically the whole body of society is trained from early days to lie, deceit ​and pretend ​to be accepted by social peers, to "make a career" ​or to simply get laid while at the same time the internet has made it much harder ​to hide and bury the continuous stream ​of humongous lies from marketing/​industry and politicians,​ it's no wonder why we have so many people with troubled mindsets, whose believe-system has been shattered, looking for answers and something else to believe in.+<​blockquote>​ 
 +  - Install M.2 NGFF SATA SSD into M2_1 and M2_2 sockets. 
 +  - Set J1 RAID Jumper ​to your desired mode or RAID initial mode. 
 +  - Set J2 jumper ​to short SET – GND. 
 +  - Connect 22-Pin SATA connector ​to SATA Host and Power. 
 +  - Turn on the power. 
 +  - Check “Device Manager” the RAID status ​of M.2 SSD . 
 +  ​Set J2 jumper ​to short SET – NC and disable RAID Mode Change 
 +<​cite>​[[http://​www.produktinfo.conrad.com/​datenblaetter/​1400000-1499999/​001420906-an-01-ml-H_W_RAID_KONTROLLER_2X_de_en_fr_nl_it_pl.pdf|User Manual]]</​cite>​ 
 +</​blockquote>​
  
-You don't longer believe in the devil (good), you don't longer believe ​(inpress/​government/​system ​(not necessarily badand you find tons of spooky and very elaborate/​scientific sounding theories on the net, where you can get lost for monthsfollowing links and absorbing more seemingly related stuff, that gives you something like comfort, a fundamental understanding why things appear as bad as they may, which you can easily digest and choose ​to believe in.+<​code>​ 
 +[38198.548757] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen 
 +[38198.548761] ata6: irq_stat 0x00400040, connection status changed 
 +[38198.548765] ata6: SError: { PHYRdyChg 10B8B DevExch } 
 +[38198.548774] ata6: hard resetting link 
 +[38204.283034] ata6: link is slow to respond, please be patient ​(ready=0) 
 +[38208.562937] ata6: COMRESET failed (errno=-16) 
 +[38208.562943] ata6: hard resetting link 
 +[38214.346804] ata6: link is slow to respondplease be patient ​(ready=0) 
 +[38218.594711] ata6: COMRESET failed ​(errno=-16) 
 +[38218.594718] ata6: hard resetting link 
 +[38224.362575] ata6: link is slow to respondplease be patient (ready=0) 
 +[38253.649908] ata6: COMRESET failed (errno=-16) 
 +[38253.649916] ata6: limiting SATA link speed to 3.0 Gbps 
 +[38253.649919] ata6: hard resetting link 
 +[38258.665790] ata6: COMRESET failed (errno=-16) 
 +[38258.665797] ata6: reset failed, giving up 
 +[38258.665803] ata6: EH complete
  
-We're facing real problems and much work lies ahead of us. Having people believe in chemtrails, a flat earth, HAARP as an earthquake weapon, HAARP as a mind-control weapon, the Chair of Montauk or any of the other thousands, absolutely ludicrous conspiracy theories makes asking really critical questions virtually impossible, because then everyone is directly associated and stamped a "​conspiracy theorist"​ with a high risk of being subjected to approved chemical lobotomy in a mental facility, "​helping"​ you to get rid of your sick and abnormal thoughts+[45419.920134] ​ sdb: sdb1 sdb2 sdb3 sdb4 
 +</​code>​
  
-Luckilyever more oftenpeople like Edward Snowden come forward and help by establishing that what others declared "​paranoid delusions ​of sociopaths"​ and "wild conspiracy theories"​were actually even worse and much more pervasive than we originally assumed.+In order to reset it was necessary to power offJ2 to SET-GNDJ1 to PM, power on, wait a couple ​of mins, power off, set J1 to R1 (Mirror), leave J2 on SET-GND, power on,  
 + 
 +<​code>​ 
 +[44010.027895] ata6: exception Emask 0x50 SAct 0x0 SErr 0x40d0800 action 0xe frozen 
 +[44010.027899] ata6: irq_stat 0x00400040, connection status changed 
 +[44010.027904] ata6: SError: { HostInt PHYRdyChg CommWake 10B8B DevExch } 
 +[44010.027912] ata6: hard resetting link 
 +[44010.757949] ata6: SATA link down (SStatus 0 SControl 300) 
 +[44010.757963] ata6: EH complete 
 +[44021.865962] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40d0002 action 0xe frozen 
 +[44021.865967] ata6: irq_stat 0x00000040, connection status changed 
 +[44021.865971] ata6: SError: { RecovComm PHYRdyChg CommWake 10B8B DevExch } 
 +[44021.865980] ata6: hard resetting link 
 +[44023.085667] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) 
 +[44023.085944] ata6.00: ATA-7: JMicron H/W RAID1, 32201020, max UDMA/133 
 +[44023.085948] ata6.00: 1953431552 sectors, multi 1: LBA48 
 +[44023.086236] ata6.00: configured for UDMA/133 
 +[44023.086247] ata6: EH complete 
 +[44023.086563] scsi 5:0:0:0: Direct-Access ​    ​ATA ​     JMicron H/W RAID 1020 PQ: 0 ANSI: 5 
 +[44023.112971] sd 5:0:0:0: Attached scsi generic sg2 type 0 
 +[44023.113113] sd 5:0:0:0: [sdb] 1953431552 512-byte logical blocks: (1.00 TB/931 GiB) 
 +[44023.113140] sd 5:0:0:0: [sdb] Write Protect is off 
 +[44023.113144] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 
 +[44023.113200] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enableddoesn'​t support DPO or FUA 
 +[44023.114644] sd 5:0:0:0: [sdb] Attached SCSI disk 
 +</​code>​
  
 {{tag>​carbon hardware diy 3d-print sourcing}} {{tag>​carbon hardware diy 3d-print sourcing}}