User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
mission:resources:picojet [2014/05/04 10:13] – [Ghetto style silicone processing] chronomission:resources:picojet [2015/02/02 18:12] (current) – [Mold] chrono
Line 35: Line 35:
  
 ==== Mold ==== ==== Mold ====
 +
 +To create something out of liquid silicone we need a mold. Luckily, once you have figured out what exactly it is you want, you can create a mold out of almost anything you find, rests of wood and any other materials you can manage to get. Keep in mind to build it as tight as possible so that the silicone won't pour out. You can see on the images how this happened here because it wasn't tight enough. At the same time, remember that it should be easy to disassemble later, to get the final product out again.
 +
 +{{:mission:resources:img_20150116_091145.jpg?210|}}
 +{{:mission:resources:img_20150116_091128.jpg?210|}}
 +{{:mission:resources:img_20150116_091213.jpg?210|}}
 +
 +{{:mission:resources:img_20150116_091452.jpg?210|}}
 +{{:mission:resources:img_20150116_091432.jpg?210|}}
 +{{:mission:resources:img_20150116_091508.jpg?210|}}
  
   * created out of wood   * created out of wood
-  * use clay (sulfur free) to cover holes and edges+  * used clay (sulfur free) to cover holes and edges (easy to apply and cheap)
   * Nylon string to hold heater element in place above the mold   * Nylon string to hold heater element in place above the mold
   * Use wood to create tube-bearing holder-pockets   * Use wood to create tube-bearing holder-pockets
   * drill a hole into the wood to place the sensor element   * drill a hole into the wood to place the sensor element
- 
 ==== Ghetto style silicone processing ==== ==== Ghetto style silicone processing ====
  
Line 68: Line 77:
  
 === Calculations === === Calculations ===
 +
 +First, we need to figure out how much energy we have to put into the fluid in order to get from room temperature to 45°C:
  
 <x 14> <x 14>
Line 81: Line 92:
 </x> </x>
  
 +Now we can determine how much heating power we need to deliver that amount of energy in a reasonable time-frame:
  
 <x 14> <x 14>
Line 119: Line 131:
  
 ==== Heat Reflector ==== ==== Heat Reflector ====
 +
 +Since the heater radiates the energy in all directions we want to reflect the heat going to the bottom upwards again, so that we don't waste energy there. Tests have shown that rescue blankets for cars (the gold/silver foil) can help with that, so a piece of this foil was inserted between the bottom glass and the silicone footer (silver side up, as this side reflects heat).
  
 ==== Prove-of-Concept Test ==== ==== Prove-of-Concept Test ====
Line 169: Line 183:
  
 === Impeller === === Impeller ===
 +
 +This was the first approach, by simply cutting the tubes and some ABS material in a half-circle shape and then gluing them onto the tube. The next test should be, if we couldn't just print something with [[mission:resources:picoprint|our 3D printer]] to make it even more comfortable.
  
 {{:mission:resources:picojet-tube-impeller-single-open.jpg?640|}} {{:mission:resources:picojet-tube-impeller-single-open.jpg?640|}}
Line 242: Line 258:
  
 {{tag>research lab spray etch machine pcb picojet silicone picofab}} {{tag>research lab spray etch machine pcb picojet silicone picofab}}
 +
 +~~DISCUSSION~~
Trace:

Page Tools