User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

mission:log:2022:11:12:pimp-my-riden-rd-6018w [2022/11/22 14:20] – created chronomission:log:2022:11:12:pimp-my-riden-rd-6018w [2023/04/19 19:18] (current) – chrono
Line 22: Line 22:
   * [[https://github.com/ShayBox/RidenGUI|RidenGUI]]   * [[https://github.com/ShayBox/RidenGUI|RidenGUI]]
   * [[https://esphome.io/|ESPHOME]]   * [[https://esphome.io/|ESPHOME]]
 +
 +=== Update ===
 +
 +As requested, here is the esphome config for it:
 +
 +<code yaml>
 +################################################################################
 +#  RD-6018W ESP-12F Configuration  #############################################
 +#  V1.0 chrono (Apollo-NG) 2022-11-13
 +
 +substitutions:
 +  name: 'rd-6018'
 +  friendly_name: 'RD-6018'
 +
 +################################################################################
 +#  GENERAL  ####################################################################
 +
 +esphome:
 +  name:                         ${name}
 +  platform:                     ESP8266
 +  board:                        esp01_1m
 +
 +wifi:
 +  ssid:                         !secret wifi_ssid
 +  password:                     !secret wifi_psk
 +  domain:                       ".iot.apollo.lan"
 +  fast_connect:                 on
 +
 +logger:
 +  baud_rate:                    0
 +
 +# Enable Home Assistant API and set reboot timeout
 +api:
 +  reboot_timeout:               60s
 +
 +# Enable OTA updates
 +ota:
 +
 +# Time sync needed for total_daily_energy calcs 
 +time:
 +  - platform:                   homeassistant
 +    id:                         homeassistant_time
 +    timezone:                   "UTC"
 +
 +################################################################################
 +#  BUS Config  #################################################################
 +
 +uart:
 +  tx_pin: 1
 +  rx_pin: 3
 +  baud_rate: 1000000
 +  debug:
 +
 +modbus_controller:
 +  address: 0x01
 +  update_interval: 10s
 +
 +################################################################################
 +#  SENSORS  ####################################################################
 +
 +text_sensor:
 +
 +  - platform:                   version
 +    name:                       "${name} - Version"
 +    icon:                       mdi:cube-outline
 +
 +
 +sensor:
 +
 +  - platform:                   uptime
 +    name:                       "${name} - Uptime"
 +    update_interval:            60s
 +    icon:                       mdi:clock-outline
 +
 +  - platform:                   wifi_signal
 +    name:                       "${name} - Wifi Signal"
 +    update_interval:            10s
 +    icon:                       mdi:wifi
 +
 +  - platform: modbus_controller
 +    name: '${friendly_name} Internal Temperature'
 +    register_type: holding
 +    address: 4
 +    register_count: 2
 +    bitmask: 0xFFFF
 +    value_type: U_DWORD
 +    unit_of_measurement: °C
 +    state_class: measurement
 +    device_class: temperature
 +    lambda: |
 +      return data[item->offset + 1] == 0 ? x : -x;
 +  - platform: modbus_controller
 +    name: '${friendly_name} External Temperature'
 +    register_type: holding
 +    address: 34
 +    register_count: 2
 +    bitmask: 0xFFFF
 +    value_type: U_DWORD
 +    unit_of_measurement: °C
 +    state_class: measurement
 +    device_class: temperature
 +    lambda: |
 +      return data[item->offset + 1] == 0 ? x : -x;
 +  - platform: modbus_controller
 +    name: '${friendly_name} Output Voltage'
 +    register_type: holding
 +    address: 10
 +    value_type: U_WORD
 +    unit_of_measurement: V
 +    state_class: measurement
 +    device_class: voltage
 +    accuracy_decimals: 2
 +    filters:
 +      - multiply: 0.01
 +
 +  - platform: modbus_controller
 +    name: '${friendly_name} Output Current'
 +    register_type: holding
 +    address: 11
 +    value_type: U_WORD
 +    unit_of_measurement: A
 +    state_class: measurement
 +    device_class: current
 +    accuracy_decimals: 2
 +    filters:
 +      - multiply: 0.01
 +
 +  - platform: modbus_controller
 +    name: '${friendly_name} Output Energy'
 +    register_type: holding
 +    address: 12
 +    value_type: U_WORD
 +    unit_of_measurement: Ah
 +    state_class: measurement
 +    device_class: energy
 +    accuracy_decimals: 2
 +    filters:
 +      - multiply: 0.001
 +  - platform: modbus_controller
 +    name: '${friendly_name} Output Power'
 +    address: 13
 +    register_type: holding
 +    value_type: U_WORD
 +    unit_of_measurement: W
 +    state_class: measurement
 +    device_class: power
 +    accuracy_decimals: 2
 +    filters:
 +      - multiply: 0.01
 +
 +  - platform: modbus_controller
 +    name: '${friendly_name} Input Voltage'
 +    register_type: holding
 +    address: 14
 +    value_type: U_WORD
 +    unit_of_measurement: V
 +    state_class: measurement
 +    device_class: voltage
 +    accuracy_decimals: 2
 +    filters:
 +      - multiply: 0.01
 +
 +  - platform: modbus_controller
 +    name: '${friendly_name} Energy'
 +    internal: true
 +    register_type: holding
 +    address: 40
 +    value_type: U_DWORD
 +    unit_of_measurement: Wh
 +    state_class: measurement
 +    device_class: energy
 +    accuracy_decimals: 3
 +    filters:
 +      - multiply: 0.001
 +
 +switch:
 +  - platform: modbus_controller
 +    name: '${friendly_name} Keypad Lock'
 +    address: 15
 +    register_type: holding
 +    bitmask: 1
 +
 +  - platform: modbus_controller
 +    name: '${friendly_name} Power'
 +    address: 18
 +    register_type: holding
 +    bitmask: 1
 +
 +number:
 +  - platform: modbus_controller
 +    name: '${friendly_name} Voltage Setting'
 +    address: 8
 +    value_type: U_WORD
 +    min_value: 0.01
 +    max_value: 60.0
 +    step: 0.01
 +    lambda: return x / 100.0f;
 +    multiply: 100
 +
 +  - platform: modbus_controller
 +    name: '${friendly_name} Current Setting'
 +    address: 9
 +    value_type: U_WORD
 +    min_value: 0.01
 +    max_value: 18.0
 +    step: 0.01
 +    lambda: return x / 100.0f;
 +    multiply: 100
 +
 +  - platform: modbus_controller
 +    name: '${friendly_name} Voltage Protection'
 +    entity_category: config
 +    address: 82
 +    value_type: U_WORD
 +    min_value: 0.01
 +    max_value: 60.0
 +    step: 0.01
 +    lambda: return x / 100.0f;
 +    multiply: 100
 +
 +  - platform: modbus_controller
 +    name: '${friendly_name} Current Protection'
 +    entity_category: config
 +    address: 83
 +    value_type: U_WORD
 +    min_value: 0.01
 +    max_value: 18.0
 +    step: 0.01
 +    lambda: return x / 100.0f;
 +    multiply: 100
 +
 +binary_sensor:
 +  - platform: modbus_controller
 +    name: '${friendly_name} Battery Mode'
 +    address: 32
 +    register_type: holding
 +    bitmask: 1
 +</code>
  
 If you want to see more, please [[https://odysee.com/$/invite/@Apollo-NG:2|join Odysee]] and [[https://odysee.com/@Apollo-NG:2|follow our channel]] there. If you want to see more, please [[https://odysee.com/$/invite/@Apollo-NG:2|join Odysee]] and [[https://odysee.com/@Apollo-NG:2|follow our channel]] there.
Trace:

Page Tools