User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

mission:log:2015:02:12:apollo-ng-live-hacking-3d-printer-with-carbon-bed-surface [2015/02/12 19:04]
chrono created
mission:log:2015:02:12:apollo-ng-live-hacking-3d-printer-with-carbon-bed-surface [2015/02/21 07:46] (current)
chrono [3D Printer Hacking - Carbon as a printing bed surface]
Line 1: Line 1:
 ====== 3D Printer Hacking - Carbon as a printing bed surface ====== ====== 3D Printer Hacking - Carbon as a printing bed surface ======
  
-This is going to be very experimental and sorry for the short notice :) Since we now have a relatively efficient video stream relaying capability thanks to [[https://​github.com/​OliverF/​mjpeg-relay/​|mjpeg-relay]] and a highly anticipated set of carbon sheets arrived today, it is time to remove the Kapton-Tape from the the [[mission:​resources:​picoprint|3D printer]] and replace it with a 0.2mm carbon sheet. So, if you're interested, put on some music you like and watch it live on [[mission:​resources:​picoprint:​live]].+This is going to be very experimental and sorry for the short notice :) Since we now have a relatively efficient video stream relaying capability thanks to [[https://​github.com/​OliverF/​mjpeg-relay/​|mjpeg-relay]] and a highly anticipated set of carbon sheets arrived today, it is time to remove the Kapton-Tape from the the [[mission:​resources:​picoprint|3D printer]] and replace it with a 0.5 mm carbon sheet. So, if you're interested, put on some music you like and watch the process ​live on [[mission:​resources:​picoprint:​live]].
  
 {{tag>​picofab picoprint software live carbon 3d-printer}} {{tag>​picofab picoprint software live carbon 3d-printer}}