User Tools

Site Tools

no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.


Last revision
—mission:log:2015:02:12:apollo-ng-live-hacking-3d-printer-with-carbon-bed-surface [2015/02/12 19:04] – created chrono
Line 1: Line 1:
 +====== 3D Printer Hacking - Carbon as a printing bed surface ======
  
 +This is going to be very experimental and sorry for the short notice :) Since we now have a relatively efficient video stream relaying capability thanks to [[https://github.com/OliverF/mjpeg-relay/|mjpeg-relay]] and a highly anticipated set of carbon sheets arrived today, it is time to remove the Kapton-Tape from the the [[mission:resources:picoprint|3D printer]] and replace it with a 0.2mm carbon sheet. So, if you're interested, put on some music you like and watch it live on [[mission:resources:picoprint:live]].
 +
 +{{tag>picofab picoprint software live carbon 3d-printer}}
 +
 +{{keywords>Apollo-NG apollo next generation hackerspace hacker space research development makerspace fablab diy community open-resource open resource mobile hackbus picofab picoprint software live carbon 3d-printer}}
 +
 +~~DISCUSSION~~
Trace:

Page Tools