====== VORON 2.4 ======

After printing for 10 years on the venerable [[https://apollo.open-resource.org/mission:resources:picoprint|f3l1ks]] it was time to push the 3D printing game to the next level and recent new developments - most importantly: CoreXY kinematic and klipper firmware. During the design phase of a new CoreXY printer a new open source community project got released: The Voron 2.4. 

https://www.vorondesign.com/voron2.4
https://mods.vorondesign.com/v24

===== LDO Kit =====

https://docs.ldomotors.com/voron/LDO_Voron_Distributors

===== Frame Assembly =====



===== Motion Rig =====



===== Electronics =====

{{:mission:resources:voron-2.4-r2-ldo-kit-odroid-dualpsu-ebay.jpg|}}


  * AIXONTEC 1 m Cat6 Gigabit Network Cable Shielded high-flex Black Thin LAN Cable with 4.0 mm Cable Diameter and short connectors: https://www.amazon.de/dp/B075F42SZL
===== Klipper Config =====

===== SuperSlicer Config =====

===== Mods =====

{{:mission:resources:voron_input_shaper_resonance_calibrate_x.png|voron_input_shaper_resonance_calibrate_x}}

{{:mission:resources:voron_input_shaper_resonance_calibrate_y.png|voron_input_shaper_resonance_calibrate_y}}